Top brands
We only distribute the best
Free next day delivery
on selected in-stock items
Bulk order discounts
Call 01708 855698
UltraFloor Patch IT Rapid Drying Repair Mortar
Product code: PATCH IT
Next day delivery
If all of your items are available for click & collect, you'll be able to select a location for pickup at checkout.
Stock availability for UltraFloor Patch IT Rapid Drying Repair Mortar
Leeds
Unit 14 Gelderd Trading Estate, West Vale, Leeds, , LS12 6BD, .
Glasgow
Unit 30 Deerdykes View, Westfield, Cumbernauld, Glasgow, G68 9HN, .
Essex
The Garage Unit. The Forge, Ockendon Road, North Ockendon, , RM14 3PS, .
Caldicot
Unit 16A Norman Way, Severn Bridge Industrial Estate, Caldicot, Monmouthshire, NP26 5PT, .
- Slump free
- Rapid setting
- Maintains profile
- Smoother to trowel
- Coverage: 3.2m² at 2mm
- 1-20mm thickness
- Open time 10 minutes
- Set time 20 minutes
- Internal floors
- Size: 10kg
- NBS Source registered for ease of specification
Ultra Products Delivery Schedule
Orders placed before midday will be dispatched for delivery the same day (except weekends and bank holidays) subject to stock availability.
Orders placed after midday will be dispatched the next working day (except weekends and bank holidays) subject to stock availability.
When you have placed your order our dispatch team will prepare your items for collection from our couriers. When the couriers have collected your items you will be emailed a tracking number.
Please note: Our offices and warehouses are open Monday to Friday, 8am to 5pm. We are closed on weekends and bank holidays. ‘Working day’ is Monday to Friday.
Please allow 3-5 working days for your delivery unless ‘Next Day Express Delivery’ is stated.
If you have ordered a product that is listed as ‘Next Day Express Delivery’ before midday on Monday to Friday your order will be processed an dispatched the same day delivered the next working day.
For example. If you order a product listed as ‘Next Day Express Delivery’ on Monday before midday it will be delivered the next day (Tuesday).
If you order a product listed as ‘Next Day Express Delivery’ on Friday before midday it will be delivered the next working day (Monday).
If you order a product listed as ‘Next Day Express Delivery’ on Friday after midday it will be processed the next working day (Monday) and delivered the following working day (Tuesday).
Orders for UK Mainland
Any orders placed Monday to Friday before midday will be processed and dispatched the same day.
Any orders placed Monday to Friday after midday will be processed and dispatched on the next working day.
Saturday delivery is available on request only – please call 01708 855 698 for a quote.
You may also like
UltraFloor Level It Multi Pro Semi Rapid Smoothing Compound
UltraFloor Patch IT FAQs
What is UltraFloor Patch IT?
UltraFloor Patch IT is a rapid drying, fast setting and hardening cementitious repair mortar for internal applications.
How do I prepare the surface before using UltraFloor Patch IT?
All subfloors should be protected from moisture from the sub ground by use of a damp proof membrane. Assess moisture levels in accordance with BS 8203, to achieve a hygrometer reading of 75% RH or less. Where this is not attained, a surface DPM should be used.
For repairs to worn or trafficked areas it is necessary to abrade the surface of the areas to remove contaminants including previous adhesive residues and any weak surface layers. Very dense non-absorbent surfaces should be lightly abraded to remove contaminants and provide a key.
A sound strong textured surface is required prior to any application of UltraFloor Patch IT.
NOTE: Where underfloor heating (UFH) systems are incorporated, they must have been fully commissioned and bought up to their maximum temperature, and ideally switched off48 hours before application. In the absence of other heat sources, the UFH may be set to ‘cutback’ position to achieve an air temperature of 15°C. Any expansion or movement joints must be carried through to the floor covering surface.
Do I need to yes a primer with UltraFloor Patch IT?
Absorbent Subfloors (concrete, sand & cement, brickwork etc): Priming is not normally required. However, very absorbent surfaces should be lightly dampened with clean water or diluted UltraFloor Prime IT Multi-surface Primer (3 parts water to 1 part primer). Allow the surface to ‘matt off’ before applying UltraFloor Patch IT.
Non-absorbent Subfloors (terrazzo/granolithic ceramic tiles and UltraFloor surface DPM etc): All non-absorbent substrates must be primed with UltraFloor Prime IT Multisurface Primer applied neat in a thin uniform application. Allow the primer to thoroughly dry before the application of UltraFloor Patch IT.
Calcium Sulphate/Anhydrite Substrates: Specific priming requirements should be in place, in conjunction with the substrate manufacturer’s guidelines. As these are not cement based, a barrier primer is needed. A surface DPM is not recommended if moisture exceeds 75% RH – therefore the screed must be below this.
How do I mix UltraFloor Patch IT?
It is important to only mix up the amount of product that can be applied within the working time of approx. 10 minutes. Do not try to reconstitute material which has began to harden offin the mixing vessel. Discard and mix up fresh material. Always use a clean mixing bucket.
- Add clean cold water to a suitable sized mixing vessel.
- Gradually add UltraFloor Patch IT to the water whilst continually mixing. Add sufficient powder to achieve lump free mortar. The mix ratios are approx. 3.5 parts powder to 1 part water when measured by volume.
- Assess the slump characteristics by lifting material with a steel trowel and holding at a 90 degree
angle. - Add more powder (whilst further mixing) if required for vertical applications.