Top brands
We only distribute the best
Free next day delivery
on selected in-stock items
Bulk order discounts
Call 01708 855698
UltraTile ProAqua Shield Tanking Kit 9kg
Product code: UT PRO AQUA SHIELD
Standard delivery
- Unit Size: 9Kg (includes flexible waterproof coating and 10m membrane tape)
- Colour: Blue
- Foot traffic: 90 minutes
- Drying time: 90 minutes
- Application temperatures: 5°C to 30°C*
- NBS Source registered for ease of specification
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact customerservices@solseal.co.uk or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact customerservices@solseal.co.uk or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
UltraTile ProFlex S2 – Fibre Reinforced Flexible Tile Adhesive 20kg
UltraTile Proflex SP – Rapid Set Flexible Tile Adhesive 20kg
UltraTile ProSS Flex Flexible Standard Set Tile Adhesive
UltraTile ProGrout Epoxy Tile Grout
UltraTile ProGrip FX Fibre Reinforced Semi-Rapid Tile Adhesive
UltraTile ProGrout Flexible Tile Grout
UltraTile ProAqua Shield FAQs
Where can I use UltraTile ProAqua Shield?
UltraTile ProAqua Shield is suitable for use as a tanking kit in a wide range of applications, including:
- Wet rooms
- Showers
- Bathrooms
- Kitchens
- Utility rooms
- Laundry rooms
- Communal showers
- Steam rooms
- Saunas
- Sanatoriums
It can be applied to a wide range of surfaces and substrates, including:
- Concrete
- Sand or cement screed
- Plywood for floor (only as an overlay, 15mm minimum).
How do I prepare the surface before using UltraTile ProAqua Shield?
Before applying ProAqua Shield tanking kit to your bathroom, wet room or shower, surface preparation is vital to ensure the area is free of contaminants and deliver maximum adhesion.
Ensure all areas are clean, dry and free from dust or any other contaminating barriers. Remove any flaking or peeling layers. Background surfaces must be free from movement.
If applying to skim plaster ensure the plastered surface is fully cured and dust free, 14-28 days depending on temperature (with >0.5% moisture) prior to application.
If applying to plasterboard ensure the boards are firmly fixed in place, securing any areas of deflection.
If applying to concrete or anhydrite-type floors ensure the surface is fully cured and dust-free with readings less than 75% humidity. All surface laitance must be removed prior to application.
How do I apply UltraTile ProAqua Shield?
UltraTile ProAqua Shield should be applied using a brush or short-pile roller to give a continuous thin layer of product, at least 0.8mm thick.
Drying time will be extended depending on the thickness applied, porosity of background and temperature, if less than 20°C.
Follow these steps to apply:
- Apply a coating of our wet room tanking kit to the junctions between wall-to-floor and wall-to-wall corners, using a paintbrush at a coverage of 1.1kg/sqm.
- Bed a strip of membrane tape into the coating while still wet to strengthen and reinforce the junction points (adjoining boards). Membrane tape can also be used to reinforce cracks, pipe entries and screw fixings.
- When dry (after 30 minutes), apply one uniform coat over the complete wall and floor area – including reinforced areas – in a continuous layer at a coverage of 1.1kg/sqm, using a paint brush or roller as previous. Allow 90 minutes’ drying time before commencing tiling.
Note: The use of dispersion adhesives may significantly extend drying times or prevent complete drying of the dispersion adhesive, depending on the tile type used.
What tile adhesive can I use after using UltraTile ProAqua Shield
Floor and wall tiles can be fixed using the below tile adhesives.